CE Marked

AC Axial Fan

60mm to 280mm, 110V/220V/380V: an industrial axial cooling fan range for enclosures, control panels and OEM equipment

Proventofan's AC axial fan range spans 60mm to 280mm frame sizes in Plastic Blade and Metal Blade construction, with 84 published electrical configurations in 110V, 220V and 380V across both constructions. Bearing options are Sleeve or Ball on Plastic Blade models, Ball only on Metal Blade models. Shortlist a model in the table below, then send your required operating point for engineering confirmation.

Browse Full Model Table Send RFQ

60–280mmFrame Size Range

110V / 220V / 380VVoltage Options

Sleeve or BallBearing

Plastic or Metal BladeConstruction

02 / SPECIFICATIONS

Complete Model Table

84 published electrical configurations across 30 construction-size groups: 21 in Plastic Blade, 9 in Metal Blade. The two constructions are shown in separate tables because their published data doesn't line up column for column (Metal Blade adds phase and capacitor data and doesn't publish static pressure). Each group expands to show every voltage and speed variant published for that size. Current, power, speed, airflow and (where published) static pressure figures are read directly from Proventofan's catalog data. Voltage Coverage in the collapsed rows uses nominal voltage families; expand a size to see the exact published voltage.

Plastic Blade Model Table

60×60×38mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 230VMax Airflow Range7.9–10.0 CFMMax Static Pressure Range1.6–2.7 mm-H₂ONoise Range26–27 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC6038HBL1	110V	50/60Hz	0.042/0.035	5.0/4.0	2500/3000	7.9/10.0	1.6/2.7	26/27
AC6038HBL2	230V	50/60Hz	0.022/0.020	5.0/4.0	2500/3000	7.9/10.0	1.6/2.7	26/27

80×80×25mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range18–21 CFMMax Static Pressure Range2.9–3.4 mm-H₂ONoise Range28.2–33 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC8025HBL1	110V	50/60Hz	0.11/0.10	13.0/10.0	2300/2600	18/21	2.9/3.4	28.2/33
AC8025HBL2	220V	50/60Hz	0.06/0.05	13.0/10.0	2300/2600	18/21	2.9/3.4	28.2/33

80×80×38mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range23–28 CFMMax Static Pressure Range2.8–4.4 mm-H₂ONoise Range34–36 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC8038HBL1	110V	50/60Hz	0.15/0.13	17.0/15.0	2400/2900	23/28	2.8/4.4	34/36
AC8038HBL2	220V	50/60Hz	0.08/0.06	17.0/15.0	2400/2900	23/28	2.8/4.4	34/36

92×92×25mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range21–25 CFMMax Static Pressure Range3.0–3.3 mm-H₂ONoise Range29–33 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC9225HBL1	110V	50/60Hz	0.11/0.10	13.0/10.0	2200/2600	21/25	3.0/3.3	29/33
AC9225HBL2	220V	50/60Hz	0.06/0.05	13.0/10.0	2200/2600	21/25	3.2/3.3	29/33

92×92×38mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range39–46 CFMMax Static Pressure Range2.8–4.4 mm-H₂ONoise Range34–38 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC9238HBL1	110V	50/60Hz	0.15/0.11	11.0/8.0	2300/2700	39/46	2.8/4.4	34/38
AC9238HBL2	220V	50/60Hz	0.07/0.06	11.0/8.0	2300/2700	39/46	2.8/4.4	34/38

110×110×25mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range30–45 CFMMax Static Pressure Range2.20–4.10 mm-H₂ONoise Range30–37 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC11025HBL1	110V	50/60Hz	0.15/0.14	17.0/15.0	2300/2700	39/45	3.90/4.10	35/37
AC11025HBL2	220V	50/60Hz	0.11/0.09	17.0/15.0	2300/2700	39/45	3.90/4.10	35/37
AC11025MBL1	110V	50/60Hz	0.11/0.10	12.0/10.0	1800/2400	30/37	3.20/2.50	30/35
AC11025MBL2	220V	50/60Hz	0.19/0.07	12.0/10.0	1800/2400	30/37	2.20/2.50	30/35

120×120×25mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range35–37 CFMMax Static Pressure Range3.80–5.0 mm-H₂ONoise Range36–38 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC12025HBL1	110V	50/60Hz	0.15/0.14	13.0/11.0	2300/2700	35/37	3.80/5.0	36/38
AC12025HBL2	220V	50/60Hz	0.09/0.08	18.0/14.0	2300/2700	35/37	3.80/5.0	36/38

120×120×38mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range72–91 CFMMax Static Pressure Range5.10–8.50 mm-H₂ONoise Range39–46 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC12038HBL1	110V	50/60Hz	0.15/0.14	17.0/14.0	2400/2700	72/83	5.10/6.80	39/42
AC12038HBL2	220V	50/60Hz	0.15/0.14	17.0/14.0	2400/2700	72/83	5.10/6.80	39/42
AC12038HBL3	380V	50/60Hz	0.07/0.06	23.0/21.0	2600/3000	80/91	6.80/8.50	42/46

135×135×32mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range110–115 CFMMax Static Pressure RangeNot publishedNoise Range44–50 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC13532HBL1	110V	50/60Hz	0.34	27/23	2500/2800	110/115	Not published	44/50
AC13532HBL2	220V	50/60Hz	0.17	27/23	2500/2800	110/115	Not published	44/50
AC13532HBL3	380V	50/60Hz	0.1	32/28	2500/2800	110/115	Not published	44/50

135×135×38mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range107–141 CFMMax Static Pressure Range4.30–6.80 mm-H₂ONoise Range41–45 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC13538HBL1	110V	50/60Hz	0.15/0.13	15.0/14.0	2400/2700	107/120	4.30/5.10	41/43
AC13538HBL2	220V	50/60Hz	0.15/0.13	15.0/14.0	2400/2700	107/120	4.30/5.10	41/43
AC13538HBL3	380V	50/60Hz	0.07/0.06	23.0/21.0	2600/3000	115/141	6.50/6.80	43/45

150×150×50mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range155–196 CFMMax Static Pressure Range7.5–14.0 mm-H₂ONoise Range45–56 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC15050HBL1	110V	50/60Hz	0.33/0.30	28/27	2400/2600	155/170	7.5/9.7	45/49
AC15050HBL2	220V	50/60Hz	0.18/0.16	28/27	2400/2600	155/170	7.5/9.7	45/49
AC15050HBL3	380V	50/60Hz	0.15/0.13	38/36	2600/3000	170/196	11.5/14.0	49/56

158×158×50mmVariantStandardBearingSleeve or BallVoltage Coverage220V / 380VMax Airflow Range240–270 CFMMax Static Pressure RangeNot publishedNoise Range58–60 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC15850HBL	200/240V	50/60Hz	0.2/0.23	43/50	2750/3100	240/270	Not published	58/60
AC15850HBL	380/420V	50/60Hz	0.11/0.14	35/49	2750/3100	240/270	Not published	58/60

160×160×62mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range220–225 CFMMax Static Pressure RangeNot publishedNoise Range50–54 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC16062HBL1	100/125V	50/60Hz	0.35	35	2300/2600	220/225	Not published	50/54
AC16062HBL2	200/240V	50/60Hz	0.18	35	2300/2600	220/225	Not published	50/54
AC16062HBL3	380/420V	50/60Hz	0.1	35	2300/2600	220/225	Not published	50/54

172×150×38mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range146–165 CFMMax Static Pressure RangeNot publishedNoise Range52–57 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC17238HBL1	110V	50/60Hz	0.17/0.18	28/29	2500/2800	146/165	Not published	52/57
AC17238HBL2	220V	50/60Hz	0.11/0.12	28/29	2500/2800	146/165	Not published	52/57
AC17238HBL3	380V	50/60Hz	0.17/0.18	28/29	2500/2800	146/165	Not published	52/57

172×150×51mmVariantRectangular FrameBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range155–196 CFMMax Static Pressure Range7.5–14.0 mm-H₂ONoise Range45–56 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC17251HBL1	110V	50/60Hz	0.33/0.30	28/27	2400/2600	155/170	7.5/9.7	45/49
AC17251HBL2	220V	50/60Hz	0.19/0.15	28/27	2400/2600	155/170	7.5/9.7	45/49
AC17251HBL3	380V	50/60Hz	0.14/0.13	38/36	2600/3000	170/196	11.5/14.0	49/56

Ø172×51mmVariantRound FrameBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range160–170 CFMMax Static Pressure RangeNot publishedNoise Range40–41 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC17251HBL1	110V	50/60Hz	0.41/0.39	32/30	2400/2300	170/160	Not published	41/40
AC17251HBL2	220V	50/60Hz	0.19/0.18	30/28	2400/2300	170/160	Not published	41/40
AC17251HBL3	380V	50Hz	0.09	30	2400	170	Not published	41

180×180×60mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range275–280 CFMMax Static Pressure Range13.1–13.18 mm-H₂ONoise Range59 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC18060HBL1	110V	60Hz	0.69	56	2600	280	13.18	59
AC18060HBL2	220V	50Hz	0.3	45	2600	280	13.18	59
AC18060HBL3	380V	50Hz	0.16	42	2550	275	13.1	59

200×200×60mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range325 CFMMax Static Pressure Range10.4 mm-H₂ONoise Range59 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC20060HBL1	110V	60Hz	0.69	56	2500	325	10.4	59
AC20060HBL2	220V	50Hz	0.3	48	2500	325	10.4	59
AC20060HBL3	380V	50Hz	0.16	45	2500	325	10.4	59

Ø200×62mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220VMax Airflow Range477–515 CFMMax Static Pressure RangeNot publishedNoise Range59–62 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC20062HBL1	110V	50/60Hz	0.42/0.46	50/60	2850/3150	477/515	Not published	59/62
AC20062HBL2	220V	50/60Hz	0.25/0.32	50/70	2850/3150	477/515	Not published	59/62

Ø220×60mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range325 CFMMax Static Pressure Range10.4 mm-H₂ONoise Range59 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC22060HBL1	110V	60Hz	0.69	56	2500	325	10.4	59
AC22060HBL2	220V	50Hz	0.3	48	2500	325	10.4	59
AC22060HBL3	380V	50Hz	0.16	45	2500	325	10.4	59

Ø254×89mmVariantStandardBearingSleeve or BallVoltage Coverage110V / 220V / 380VMax Airflow Range700–800 CFMMax Static Pressure Range19.8 mm-H₂ONoise Range80 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Max Static Pressure (mm-H₂O)	Noise (dB-A)
AC25489HBL1	110V	50/60Hz	0.40/0.59	44/63	2200/2600	700/800	19.8	80
AC25489HBL2	220V	50/60Hz	0.22/0.18	45/62	2200/2600	800/800	19.8	80
AC25489HBL3	380V	50/60Hz	0.15/0.18	50/68	2700/2700	800/800	19.8	80

Click the + next to any group to see every published voltage variant for that size, with full electrical figures. Where two values are shown in a detail-row cell, the first is 50Hz and the second is 60Hz, as published. Bearing is Sleeve or Ball across every Plastic Blade group — specify your preference at order time.

Metal Blade Model Table

80×80×38mmBearingBall onlyVoltage Coverage110V / 220VMax Airflow Range28–34 CFMNoise Range30–34 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC8038MBL1	100/125V	50/60Hz	0.18/0.15	14/11	2700/3250	28/34	1	Not published	30/34
AC8038MBL2	200/240V	50/60Hz	0.09/0.1	16/14	2700/3250	28/34	1	Not published	30/34

92×92×38mmBearingBall onlyVoltage Coverage110V / 220VMax Airflow Range46–56 CFMNoise Range37–42 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC9238MBL1	100/125V	50/60Hz	0.18/0.18	16/14	2600/3000	46/56	1	Not published	37/42
AC9238MBL2	200/240V	50/60Hz	0.1/0.09	16/14	2600/3000	46/56	1	Not published	37/42

120×120×38mmBearingBall onlyVoltage Coverage110V / 220VMax Airflow Range97–111 CFMNoise Range46–50 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC12038MBL1	100/125V	50/60Hz	0.21/0.21	23/20	2600/3000	97/111	1	Not published	46/50
AC12038MBL2	200/240V	50/60Hz	0.15/0.13	23/20	2600/3000	97/111	1	Not published	46/50

172×150×55mmBearingBall onlyVoltage Coverage110V / 220VMax Airflow Range191–224 CFMNoise Range48–52 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC17255MBL1	100/125V	50/60Hz	0.58/0.5	42/39	2800/3100	191/224	1	Not published	48/52
AC17255MBL2	200/240V	50/60Hz	0.25/0.2	35/31	2800/3100	191/224	1	Not published	48/52

200×200×60mmBearingBall onlyVoltage Coverage110V / 220V / 380VMax Airflow Range427–490 CFMNoise Range63–68 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC20060MBL1	100/120V	50/60Hz	0.35/0.43	42/53	2800/3300	427/490	1	3.3/250	63/68
AC20060MBL2	200/240V	50/60Hz	0.18/0.25	42/53	2800/3300	427/490	1	1/500	63/68
AC20060MBL3	380/400V	50/60Hz	0.08/0.09	42/55	2800/3300	427/490	3	Not applicable (three-phase)	63/68
AC20060MBL4	380/400V	50/60Hz	0.08/0.09	42/55	2800/3300	427/490	1	1/500	63/68

Ø220×60mmBearingBall onlyVoltage Coverage110V / 220V / 380VMax Airflow Range427–490 CFMNoise Range63–68 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC22060MBL1	100/120V	50/60Hz	0.35/0.43	42/53	2800/3300	427/490	1	3.3/250	63/68
AC22060MBL2	200/240V	50/60Hz	0.18/0.25	42/53	2800/3300	427/490	1	1/500	63/68
AC22060MBL3	380/400V	50/60Hz	0.08/0.09	42/55	2800/3300	427/490	3	Not applicable (three-phase)	63/68
AC22060MBL4	380/400V	50/60Hz	0.08/0.09	42/55	2800/3300	427/490	1	1/500	63/68

225×225×80mmBearingBall onlyVoltage Coverage110V / 220V / 380VMax Airflow Range605–642 CFMNoise Range65–68 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC22580MBL1	100/120V	50/60Hz	0.68/0.65	67/77	2550/2850	605/642	1	4/250	65/68
AC22580MBL2	200/240V	50/60Hz	0.35/0.28	60/80	2550/2850	605/642	1	2.2/500	65/68
AC22580MBL3	380/400V	50/60Hz	0.45/0.4	62/77	2550/2850	605/642	3	Not applicable (three-phase)	65/68
AC22580MBL4	380/400V	50/60Hz	0.16/0.19	62/74	2550/2850	605/642	1	Not published	65/68

Ø254×89mmBearingBall onlyVoltage Coverage110V / 220V / 380VMax Airflow Range955–993 CFMNoise Range68–70 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC25489MBL1	100/120V	50/60Hz	0.98/1.15	67/77	2500/2650	955/993	1	4/250	68/70
AC25489MBL2	200/240V	50/60Hz	0.56/0.74	124/161	2500/2650	955/993	1	2.2/500	68/70
AC25489MBL3	380/400V	50/60Hz	0.3/0.4	108/132	2500/2650	955/993	3	Not applicable (three-phase)	68/70
AC25489MBL4	380/400V	50/60Hz	0.28/0.34	108/132	2500/2650	955/993	1	1/500	68/70

280×280×80mmBearingBall onlyVoltage Coverage110V / 220V / 380VMax Airflow Range1098–1160 CFMNoise Range69–70 dB(A)

Model	Voltage	Freq	Current (A)	Power (W)	Speed (RPM)	Max Airflow (CFM)	Phase	Capacitor (µF/VAC)	Noise (dB-A)
AC28080MBL1	100/120V	50/60Hz	1.2/1.3	126/148	2500/2800	1098/1160	1	2.8/250	69/70
AC28080MBL2	200/240V	50/60Hz	0.58/0.63	126/148	2500/2800	1098/1160	1	4/500	69/70
AC28080MBL3	380/400V	50/60Hz	0.75/0.9	120/136	2500/2800	1098/1160	3	Not applicable (three-phase)	69/70
AC28080MBL4	380/400V	50/60Hz	0.24/0.25	120/136	2500/2800	1098/1160	1	2/500	69/70

Static Pressure is not published for Metal Blade in this table — contact us to confirm the value for your model. Bearing is Ball only across every Metal Blade group.

Send RFQ for Your Frame Size

03 / MATERIAL & CONSTRUCTION

Plastic Blade vs. Metal Blade

Both constructions use die-cast aluminum frames. The impeller construction differs: Plastic Blade uses a PBT impeller, Metal Blade uses a welded metal impeller bonded directly to the motor rotor. The two constructions also differ in bearing options, operating temperature range and ingress protection rating.

Specification	Plastic Blade	Metal Blade
Frame	Aluminum die-casting, black anti-corrosion treatment	Aluminum die-casting, black electrophoresis anti-corrosion
Impeller	Black PBT, UL94V-0	Metal, welded to the motor rotor, black electrophoresis finish
Bearing	Sleeve or Ball (specify at order)	Ball only
Voltage	110V / 220V / 380V	110V / 220V / 380V
Protection	Impedance protected	Impedance protected
IP Rating	IP34	IP44
Operating Temperature	−30°C to +60°C	−40°C to +80°C
Humidity	0–95%	0–95%
Withstand Voltage	AC 1,500V, 1 minute at 0.5mA, 50/60Hz	AC 1,500V, 1 minute at 0.5mA, 50/60Hz
Connection	Lead wire, terminal or plug-in	Lead wire, terminal or plug-in

Plastic Blade

Sizes run from 60×60×38mm to Ø254×89mm, 21 frame sizes in total. This is the wider size range of the two constructions and the only one with a sleeve-bearing option.

Metal Blade

Sizes run from 80×80×38mm to 280×280×80mm, 9 frame sizes. The welded impeller and higher IP rating suit continuous high-temperature or higher-airflow duty. Static pressure is not published for this construction; see the Complete Model Table above for what is published at each size.

04 / HEAD TO HEAD

Plastic vs. Metal Blade: Performance at the Same Frame Size

Six frame sizes are published in both constructions. The numbers below are read straight from the catalog and cover Airflow, Speed, Noise and Power. For static pressure at a specific size, see the Complete Model Table above or send us your required operating point for confirmation. Use this range for shortlisting, not as a confirmed operating point.

Max published airflow at the six shared sizes

Plastic BladeMetal Blade

80×80×38mm28 CFM34 CFM
92×92×38mm46 CFM56 CFM
120×120×38mm91 CFM111 CFM
200×200×60mm325 CFM490 CFM
Ø220×60mm325 CFM490 CFM
Ø254×89mm800 CFM993 CFM

Frame Size	Construction	Airflow Range	Speed Range	Noise Range	Power Range
80×80×38mm	Plastic Blade	23–28 CFM	2,400–2,900 RPM	34–36 dB(A)	15–17W
80×80×38mm	Metal Blade	28–34 CFM	2,700–3,250 RPM	30–34 dB(A)	11–16W
92×92×38mm	Plastic Blade	39–46 CFM	2,300–2,700 RPM	34–38 dB(A)	8–11W
92×92×38mm	Metal Blade	46–56 CFM	2,600–3,000 RPM	37–42 dB(A)	14–16W
120×120×38mm	Plastic Blade	72–91 CFM	2,400–3,000 RPM	39–46 dB(A)	14–23W
120×120×38mm	Metal Blade	97–111 CFM	2,600–3,000 RPM	46–50 dB(A)	20–23W
200×200×60mm	Plastic Blade	325 CFM	2,500 RPM	59 dB(A)	45–56W
200×200×60mm	Metal Blade	427–490 CFM	2,800–3,300 RPM	63–68 dB(A)	42–55W
Ø220×60mm	Plastic Blade	325 CFM	2,500 RPM	59 dB(A)	45–56W
Ø220×60mm	Metal Blade	427–490 CFM	2,800–3,300 RPM	63–68 dB(A)	42–55W
Ø254×89mm	Plastic Blade	700–800 CFM	2,200–2,700 RPM	80 dB(A)	44–68W
Ø254×89mm	Metal Blade	955–993 CFM	2,500–2,650 RPM	68–70 dB(A)	67–161W

Across all six shared frame sizes, Metal Blade publishes a higher maximum airflow. Its published noise range is higher at four of the six shared sizes; 80×80×38mm and Ø254×89mm are the exceptions, where Metal Blade's noise range is lower. Power is shown instead of current, since current varies by voltage for the same physical performance and comparing current across a voltage mix would be misleading.

Wondering how a speed or size change would shift these numbers? Our Fan Laws Calculator works through the airflow, pressure and power relationships behind a change like that.

05 / APPLICATION FIT

Enclosure & Panel Cooling

Not every application in this size range gets equal billing here. These three have a real, confirmed fit for this product line.

AC axial fan cooling an electrical enclosure

Electrical Enclosure Cooling

Direct airflow through an electrical enclosure removes heat generated by drives, power supplies and control electronics. This is the bare fan, not a filtered assembly; for enclosures where dust and particulate ingress is a concern, see Fan Filter Units instead.

AC axial fan cooling an electrical control panel

Control Panel Cooling

Control panels running PLCs, drives and relays generate heat in a confined space. Plastic Blade models in the 80mm to 150mm range suit compact panel mounting; see the Complete Model Table above for airflow and noise figures at those sizes.

AC axial fan ventilating an electrical cabinet

Electrical Cabinet Ventilation

Larger cabinets and switchgear enclosures need higher airflow to keep ahead of internal heat load. Metal Blade models above 200mm publish the highest airflow in this range; check the Technical Comparison table above for the same-size airflow difference against Plastic Blade.

For dedicated exhaust-airflow applications, see our axial exhaust fan guide.

06 / BEFORE YOU ORDER

What to Confirm Before You Order

Read the Model String Before You Order

Two model names in this catalog carry more than one meaning. AC17251HBL is published as two different products: a 172×150×51mm rectangular frame with the same performance as AC15050, and a separate Ø172×51mm round frame with different dimensions and performance. AC15850HBL covers two different voltage bands, 200/240V and 380/420V, under the same model name with no suffix to tell them apart. Always confirm the full frame shape and voltage, not just the model string.

Outgoing Tests Don't Catch Every Failure Mode

A routine outgoing test confirms a motor spins up and draws the expected current in a few seconds. It won't reveal a marginal interturn short or a bearing running dry, failure modes that only show themselves after continuous operation. If your application runs fans unattended for extended periods, ask what burn-in or extended test protocol applies to your order rather than assuming a passed spot check covers it.

Verify Grounding Continuity Where Protective Earth Is Used

On models or orders that include a protective-earth connection, verify low-resistance continuity between the metal housing and the PE lead. That path runs through the press fit between the stator assembly and the frame, a point where contamination during assembly can leave the connection looking correct while it fails a resistance check. General QC doesn't include this check by default; for safety-critical installations, request it explicitly on your order.

Tell Us Your Real Operating Environment

A fan sized for standard indoor ambient can show several unrelated failures in the same batch when the real environment runs hotter or dustier than disclosed: undersized capacitors, thermal protectors cycling more often than their rated frequency, and bearing grease breaking down early. State your actual temperature and dust conditions at RFQ stage so the right components get specified the first time.

A Repeat Order Isn't Automatically the Same Batch

The same model number can fail for different reasons in different batches: a scratched winding insulation, packaging debris that migrated into a rotor, corrosion on a bearing that sat in storage. A clean record on your last order doesn't guarantee the next one. A proven part number still needs its own inspection record each time it ships.

A Passed Sample Isn't a Guarantee for Every Batch

Some failure modes come from a gap in production handling rather than the part design itself. Welding calibration runs can produce blades with an incomplete bond, and if that batch isn't isolated from normal production at shift handover, a defective unit can ship and not show a problem until well over a year in service. Ask your supplier how nonconforming material from process adjustments is tracked and kept out of shipped batches.

07 / CERTIFICATION & QUALITY

Certification & Quality

Product Compliance

All models in this range carry CE marking.

Quality Management System: Our quality management system is certified to ISO 9001 at the company level, not as a per-model product certification. Certificate numbers and the certified entity are available on request rather than published here.
Construction: Plastic Blade impellers are black PBT rated UL94V-0. This rating applies to the Plastic Blade impeller only; Metal Blade impellers are welded metal and don't carry a flame rating. Both constructions are rated for withstand voltage of AC 1,500V, 1 minute at 0.5mA, 50/60Hz, and both use impedance-protected motors for locked-rotor protection.
Ingress Protection: IP34 on Plastic Blade, IP44 on Metal Blade. Both constructions are rated for 0–95% humidity.

08 / FACTORY & QC

Factory & QC

These stations are shared across Proventofan's fan lines, including this AC axial fan range. Key stages: motor winding, automated assembly, airflow and static-pressure testing, quality inspection, and packaging.

Motor winding station on the Proventofan production line — Motor Winding

Automated fan assembly line at Proventofan — Automated Production Line

Airflow and static pressure test duct at Proventofan — Airflow & Static Pressure Test

Quality inspection station at Proventofan — Quality Inspection

Fan packaging and outgoing inspection at Proventofan — Packaging

09 / OEM SUPPORT

AC Axial Fan Manufacturer Support for OEM Orders

What to Include in the RFQ

Frame size, construction (Plastic or Metal Blade), voltage, required airflow, required static pressure, bearing preference, quantity, and destination market. If static pressure is unknown, send your enclosure or airflow-path details instead.

Send RFQ

Fan assembly production line at the Proventofan factory

Commercial Terms

Warranty: 12 months from shipment
Payment terms: confirmed per order based on volume and history, not a fixed template
Response time: within 1 business day
Standard catalog orders: MOQ 10 units
OEM custom-specification orders: MOQ 50 units
Private-label / custom-branding orders: MOQ 50 units; No tooling fee on standard frame modifications
Samples: no minimum order quantity
Sample lead time: 3–7 days standard, 5–10 days for a custom specification
Production lead time: 15–20 days standard, 18–25 days for a custom specification

11 / Request a Quote

Ready to Match a Model?

Send your frame size, construction, voltage, required airflow/static pressure and quantity, or ask our engineering team for a recommendation.

We respond within 1 business day.

WhatsApp Us

Proventofan fan performance test bench measuring airflow and static pressure for custom OEM fans

12 / FAQ

Frequently Asked Questions

Plastic Blade or Metal Blade: how do I choose?

Plastic Blade covers a wider size range and offers a Sleeve bearing option; Metal Blade rates to a wider temperature range (−40°C to +80°C) and a higher IP44 ingress protection. Check the Technical Comparison table above for the airflow difference at shared sizes.

What sizes are available?

Frame sizes range from 60mm to 280mm across 30 published groups. Square frame sizes in this range are also known as muffin fans in some industry catalogs. See the Complete Model Table above for the full breakdown by construction, size and voltage.

What voltage options do you offer?

Both constructions are grouped into nominal 110V, 220V and 380V families; the exact nameplate voltage varies by model (for example 100/125V, 200/240V or 380/420V on some sizes). Every size has a 110V-class and a 220V-class version except the Plastic Blade 158×158×50mm, which comes in 200/240V and 380/420V only. 380V-class versions are published on Plastic Blade 120×120×38mm and every Plastic Blade size from 135mm up except Ø200×62mm, and on Metal Blade from 200mm up, in three-phase and single-phase versions. Check the model table for the exact voltage at your size.

What is the UL94 flame rating on the plastic impeller?

Plastic Blade impellers are rated UL94V-0. This applies to the Plastic Blade impeller specifically; Metal Blade impellers are welded metal and don't carry a flame rating.

What is the operating temperature range for Metal Blade models?

Metal Blade is rated −40°C to +80°C. Plastic Blade is rated −30°C to +60°C, a narrower range.

What bearing options are available?

Plastic Blade offers Sleeve or Ball, specified at order. Metal Blade ships with Ball bearing only.

Do these fans include a filter or guard?

No. This range is the bare fan. For a filtered, dust-protected assembly, see Fan Filter Units instead.

What is the MOQ for OEM orders?

Standard catalog orders have a MOQ of 10 units. OEM custom-specification and private-label orders have a MOQ of 50 units. There is no minimum for samples. See Commercial Terms above for full order terms.

What is the sample and production lead time?

Samples ship in 3 to 7 days standard, 5 to 10 days for a custom specification. Production runs 15 to 20 days standard, 18 to 25 days for a custom specification.

What certifications do these fans carry?

CE marking applies across the range, and our facility holds ISO 9001 certification at the company level. Specific certificate numbers and the certified entity are available on request.

Can you customize voltage, frame size or bearing configuration?

Voltage and bearing requirements within the published range can be reviewed case by case. Non-standard frame dimensions require a separate engineering and tooling evaluation. Send your requirement and we'll confirm what's involved.

How do I choose the right size and voltage for my application?

Start with your required airflow and static pressure, then check frame size, construction, voltage and bearing preference against the model table above, or send your requirement directly for an engineering recommendation.

13 / GO DEEPER